October 3, 2022


Digital Signage, DOOH News and Information

Zytronic meets exacting requirements of oil & gas sector

4 min read

PCT touch sensors integrated into explosion-proof HMI solution targeted at use in hazardous areas

The proprietary Projected Capacitive Technology (PCT™) developed by Zytronic has on many occasions proved its ability to be employed in the most uncompromising of environments. Recent successes in heavy industry have further underlined this, showing its superior performance over alternative touch solutions. Among these successes are the inclusion of the company’s ZYTOUCH® and ZYBRID® products by ‘mission critical’ process controls manufacturer iSiS-Ex in their new range of explosion-proof terminals designed for use in offshore oil and gas drilling.

Enabling the collection and analysis of data by operatives on drilling rigs, these terminals depend upon a rugged human machine interface (HMI) that is easy to use – so that vital information can be rapidly viewed, understood and then acted upon; combined with a high degree of isolation – so that the electrical hardware inside the terminals does not come into contact with the potentially combustible gases and liquids outside – thereby putting lives at risk. In addition, due to the incredibly tough working environment in which the terminals are deployed, it is essential that the chosen touch technology is capable of faultless outdoor 24/7 operation, exposure to corrosive salt water and oil, plus response to the touches of users wearing heavy work gloves.

Touchscreen solutions based on conventional projective capacitance (p-cap) methods would be incapable of coping with such a demanding set of criteria, as they lack the sensitivity to determine touch events through more than one or two mm of front glass. However, Zytronic’s PCT touch sensor products are particularly suited to, and are proven in, applications of this kind due to their unique construction and sensing method. The near invisible XY matrix of highly conductive capacitors that make up PCT sensors, are a mere 10 microns in diameter. Zytronic’s proprietary self-capacitive touch sensing technique induces a known frequency (around 1 MHz) within these capacitors, which in turn, is altered by a user’s body capacitance when their finger comes in proximity with that part of the touchscreen’s surface. Through sophisticated algorithms embedded within the connected touch controller’s firmware, the position of peak frequency change is interpolated. This method of touch detection is so sensitive, that the PCT sensor matrix may be embedded within a laminated, thick protective overlay. The firmware may also be easily tuned by the user via a driver to adjust touch sensitivity and threshold detection levels so that the screen will respond to the lightest of touches or full finger pressure, depending on application requirements. It can also support heavily gloved hand operation, making it highly optimised for outdoor and industrial applications.

Customised 15 and 19-inch versions of the highly rugged PCT touch sensors have been integrated into the iSiS-Ex terminals, along with ZXY100 high performance touch controllers, and they are already being deployed on oil rigs around the globe. Using thermally toughened glass with thicknesses of up to 23 mm, these touch interactive terminals are capable of coping with the rigours of Zone 1 hazardous environments.

“Maintaining touch performance through such thick protective overlays would be way beyond the scope of competing p-cap solutions,” Ian Crosby, Sales & Marketing Director at Zytronic explains. “This meant the PCT stood out as the only way to bring the benefits of touch-enabled interaction to this challenging application. Our collaboration with iSiS-Ex represents another important example of how Zytronic’s unique touch technology, is aiding designers of human-machine interfaces deploy touchscreens in the most challenging surroundings.”

— Ends —

About Zytronic

Zytronic designs and manufactures a range of technologies that optimise the performance of electronic display applications.  The company’s principle products include award-winning touch sensor technologies, optical filters for enhanced performance and protection, and special filters to minimise electromagnetic emissions.  In addition, the company can offer complex shaped glass composites for specialised applications.

Zytronic products are used in electronic displays for information kiosks, web phones, ATMs and gaming machines, as well as by military, computer, telecommunications, medical and lighting OEMs, and are available from its network of worldwide distributors.

The company is headquartered at its state-of-the-art manufacturing facility in Blaydon, Tyne & Wear in the UK.  In addition to ISO-approved manufacturing (including ISO 14001:2004), this facility is responsible for ongoing product development in composite technology and is home to Zytronic’s team of lamination, material science and electronics specialists.

For more company information, visit Zytronic’s web site at www.zytronic.co.uk or find us on

About iSiS-Ex

iSiS-Ex has offices in York, UK and Houston, Texas. It has a unique heritage of engineering expertise spanning more than 20 years. The company designs and manufactures human machine interface (HMI) solutions that are approved as safe for use in explosive and hazardous environments, primarily in the offshore and onshore oil and gas industries. iSiS-Ex is one of the largest manufacturers of this type of product worldwide and its customer base includes most of the world’s leading blue chip companies operating within this sector. www.isis-ex.com

Source: Zytronic

All product and company names listed on this website are trademarks™ or registered® trademarks of their respective holders. | Newsphere by AF themes.